
I thought I would tackle the bathroom this Labor Day and finish it once and for all. Ohhhhh...was I wrong on that whole finishing thing. It didn't actually take that long to remove the sink from the crappy old counter top. It was screwed in with some kind of brackets, there was about 20 of them. Once I discovered that removing the keystone bracket would cause the sink to come crashing down on my beautiful face, I enlisted the help of Andi to assist with it's removal.
Once that was gone, it was really just a matter of yanking a little bit and viola, no more counter top. A lot of that old hard ware was a pain the arse to remove, and I bought some turn of the century (not that century the other one) PVC pipe to replace everything. As expected, the wall wasn't square which meant the counter top would have to be shaved a little bit.
This little shaving was actually about 1/2 inch at the thickest, a little more than my belt sander could chew. !#$%, now what? I know, a call to Papa R for some home fixin' advice. The advice was sound and it turned out great. I made a series of small shallow cuts with my scroll saw, and then used a chisel to cut the pieces off. After that, sanding was no biggie. The top fit perfectly.
Now the drama started. The sink went in good, but by this time the boys were waking up and I didn't want to rush things. It turns out that the back splash on the new top was smaller than the old. As you can see, that left a nice space of
whiteness that has to be cleaned up. I decided to do this right so I sanded, mudded, smoothed it out, primed (created my own textured prime) and painted with the new color. This all sounds simple, but what I just described happened in a 24 hour period and required me making two trips to Home Depot.
Once I was ready to install the counter top, that went quickly and the boys even helped to level it off. The sink installation required more drama, as it turns out I bought the wrong size braided hose for the faucet connections (double !#@!%). Also, when I went to install the J-pipe to the drain and wall connector, I discovered that connecting a new sink to old plumbing doesn't always connect so well. Another !#%&en trip to the Depot was in order. I didn't know how I was going to bridge a 2 inch gap between the drain and pipe.
The next day (see Ethan and Logan drama) Logan and I went to the Depot yet again and found some nuts, washers, and a bendy connection. It kind of reminded me of a child pop toy. Well, with some handy connections, I managed to decide I was one part short of completing, which meant another trip to the Depot. Tonight, I am glad to say, I didn't need that trip to the Depot, and I have everything installed. It works, no leaks and looks great.
Next weekend, or the weekend after, Andi and I are now inspired to replace the toilet since that is the last piece (forget the tub) to be done.